advanced power n and p-channel enhancement electronics corp. mode power mosfet simple drive requirement n-ch bv dss 60v lower gate charge r ds(on) 64m fast switching performance i d 4.5a rohs compliant & halogen-free p-ch bv dss -60v r ds(on) 125m description i d -3a absolute maximum ratings@t j =25 o c(unless otherwise specified) symbol parameter rating units n-channel p-channel v ds drain-source voltage 60 -60 v v gs gate-source voltage 20 20 v i d @t a =25 4.5 -3 a i d @t a =70 3.6 -2.4 a i dm pulsed drain current 1 20 -20 a p d @t a =25 total power dissipation 2.0 w t stg storage temperature range -55 to 150 t j operating junction temperature range -55 to 150 symbol value unit rthj-a maximum thermal resistance, junction-ambient 3 62.5 /w data and specifications subject to change without n otice 201501092 parameter 1 thermal data ap4578gm-hf halogen-free product drain current, v gs @ 10v 3 drain current, v gs @ 10v 3 s1 g1 s2 g2 d1 d1 d2 d2 so-8 g2 d2 s2 g1 d1 s1 ap4578 series are from advanced power innovated design and silicon process technology to achieve the lowest possib le on-resistance and fast switching performance. it provides the designer with an extreme efficient device for use in a wide range of power applications. the so-8 package is widely preferred for all commercial- industrial surface mount applications using infrared reflow technique and suited for voltage conversion or switch applications.
n-ch electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 60 - - v bv dss / t j breakdown voltage temperature coefficient reference to 25 , i d =1ma - 0.05 - v/ r ds(on) static drain-source on-resistance 2 v gs =10v, i d =4a - 55 64 m v gs =4.5v, i d =2a - 65 80 m v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =4a - 7 - s i dss drain-source leakage current v ds =60v, v gs =0v - - 1 ua drain-source leakage current (t j =70 o c) v ds =48v, v gs =0v - - 25 ua i gss gate-source leakage v gs =20v - - 100 na q g total gate charge i d =4a - 9 17 nc q gs gate-source charge v ds =48v - 3 - nc q gd gate-drain ("miller") charge v gs =4.5v - 4 - nc t d(on) turn-on delay time v ds =30v - 9 - ns t r rise time i d =1a - 5 - ns t d(off) turn-off delay time r g =3.3 ,v gs =10v - 22 - ns t f fall time r d =30 - 7 - ns c iss input capacitance v gs =0v - 730 1170 pf c oss output capacitance v ds =25v - 80 - pf c rss reverse transfer capacitance f=1.0mhz - 60 - pf r g gate resistance f=1.0mhz - 1.8 2.7 source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =1.7a, v gs =0v - - 1.2 v t rr reverse recovery time i s =4a, v gs =0v - 28 - ns q rr reverse recovery charge di/dt=100a/s - 39 - nc 2 ap4578gm-hf
ap4578gm-hf p-ch electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =-250ua -60 - - v bv dss / t j breakdown voltage temperature coefficient reference to 25 ,i d =-1ma - -0.04 - v/ r ds(on) static drain-source on-resistance 2 v gs =-10v, i d =-3a - 100 125 m v gs =-4.5v, i d =-2a - 120 150 m v gs(th) gate threshold voltage v ds =v gs , i d =-250ua -1 - -3 v g fs forward transconductance v ds =-10v, i d =-2a - 5 - s i dss drain-source leakage current v ds =-60v, v gs =0v - - -1 ua drain-source leakage current (t j =70 o c) v ds =-48v, v gs =0v - - -25 ua i gss gate-source leakage v gs =20v - - 100 na q g total gate charge 2 i d =-3a - 12 20 nc q gs gate-source charge v ds =-48v - 2 - nc q gd gate-drain ("miller") charge v gs =-4.5v - 6 - nc t d(on) turn-on delay time 2 v ds =-30v - 10 - ns t r rise time i d =-1a - 6 - ns t d(off) turn-off delay time r g =3.3 ,v gs =-10v - 33 - ns t f fall time r d =30 - 6 - ns c iss input capacitance v gs =0v - 905 1450 pf c oss output capacitance v ds =-25v - 90 - pf c rss reverse transfer capacitance f=1.0mhz - 75 - pf r g gate resistance f=1.0mhz - 12 18 source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =-1.7a, v gs =0v - - -1.2 v t rr reverse recovery time i s =-3a, v gs =0v - 36 - ns q rr reverse recovery charge di/dt=-100a/s - 55 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test 3.surface mounted on 1 in 2 copper pad of fr4 board, t < 10sec ; 135 /w when mounted on min. copper pad. this product is sensitive to electrostatic discharg e, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized . apec does not assume any liability arising out of t he application or use of any product or circuit des cribed herein; neither does it convey any license under it s patent rights, nor the rights of others. apec reserves the right to make changes without fur ther notice to any products herein to improve reliability, function or design. 3
n-channel fig 1. typical output characteristics fig 2. typical output characteristics -6.3 -5 fig 3. on-resistance v.s. gate volta ge fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate thresho ld voltage v.s. reverse diode junction temperature 4 ap4578gm-hf 0 5 10 15 20 25 0 1 2 3 4 5 v ds , drain-to-source voltage (v) i d , drain current (a) t a = 25 o c 10v 7.0v 5.0v 4.5v v g =3.0v 0 5 10 15 20 25 0 1 2 3 4 5 v ds , drain-to-source voltage (v) i d , drain current (a) t a =150 o c 10v 7.0v 5.0v 4.5v v g =3.0v 50 55 60 65 70 75 2 4 6 8 10 v gs , gate-to-source voltage (v) r ds(on) (m ? ) i d = 2 a t a =25 o c 0.6 0.8 1.0 1.2 1.4 1.6 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d =4a v g =10v 0 1 2 3 4 0 0.2 0.4 0.6 0.8 1 1.2 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =150 o c 0 0.5 1 1.5 2 -50 0 50 100 150 t j ,junction temperature ( o c) normalized v gs(th)
ap4578gm-hf n-channel fig 7. gate charge characteristics fig 8. typical capacitance characteristi cs fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. transfer characteristics fig 12. gate charge waveform 5 q v g 4.5v q gs q gd q g charge 0 2 4 6 8 10 12 0 4 8 12 16 20 q g , total gate charge (nc) v gs , gate to source voltage (v) i d = 4 a v ds = 48 v 10 100 1000 1 5 9 13 17 21 25 29 v ds , drain-to-source voltage (v) c (pf) f=1.0mhz c iss c oss c rss 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , pulse width (s) normalized thermal response (r thja ) 0.01 0.05 0.1 0.2 duty factor=0.5 single pulse p dm duty factor = t/t peak t j = p dm x r thja + t a r thja = 135 /w t t 0.02 0.01 0.1 1 10 100 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) i d (a) t a =25 o c single pulse 100us 1ms 10ms 100ms 1s dc 0 5 10 15 20 25 0 2 4 6 8 v gs , gate-to-source voltage (v) i d , drain current (a) t j =125 o c t j =25 o c v ds =5v
p-channel fig 1. typical output characteristics f ig 2. typical output characteristics fig 3. on-resistance v.s. gate voltag e fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate thresho ld voltage v.s. reverse diode junction temperature 6 ap4578gm-hf 0 5 10 15 20 0 1 2 3 4 5 6 7 -v ds , drain-to-source voltage (v) -i d , drain current (a) t a = 25 o c -10v -7.0v -5.0v -4.5v v g = - 3.0v 0 5 10 15 20 0 1 2 3 4 5 6 7 -v ds , drain-to-source voltage (v) -i d , drain current (a) t a =150 o c -10v -7.0v -5.0v -4.5v v g = - 3.0v 130 140 150 160 170 2 4 6 8 10 -v gs , gate-to-source voltage (v) r ds(on) (m ? ) i d = -2 a t a =25 o c 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d = -3 a v g = - 10v 0 1 2 3 0 0.2 0.4 0.6 0.8 1 1.2 -v sd , source-to-drain voltage (v) -i s (a) t j =25 o c t j =150 o c 0 0.5 1 1.5 2 -50 0 50 100 150 t j , junction temperature ( o c) normalized v gs(th)
ap4578gm-hf p-channel fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. ef fective transient thermal impedance fig 11. transfer characteristics fig 12. gate charge waveform 7 q v g -4.5v q gs q gd q g charge 0 2 4 6 8 10 12 0.0 5.0 10.0 15.0 20.0 25.0 q g , total gate charge (nc) -v gs , gate to source voltage (v) i d =-3a v ds =-48v 10 100 1000 10000 1 5 9 13 17 21 25 29 -v ds , drain-to-source voltage (v) c (pf) f=1.0mhz c iss c oss c rss 0.01 0.1 1 10 100 0.1 1 10 100 1000 -v ds , drain-to-source voltage (v) -i d (a) t a =25 o c single pulse 100us 1ms 10ms 100ms 1s dc 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , pulse width (s) normalized thermal response (r thja ) p dm duty factor = t/t peak t j = p dm x r thja + t a r thja = 135 /w t t 0.02 0.01 0.05 0.1 0.2 duty factor=0.5 single pulse 0 5 10 15 20 0 2 4 6 8 -v gs , gate-to-source voltage (v) -i d , drain current (a) t j =150 o c t j =25 o c v ds =-5v
ap4578gm-hf marking information 8 4578gm ywwsss part number date code (ywwsss) y last digit of the year ww week sss sequence package code meet rohs requirement for low voltage mosfet only
|
